Summit DW18SS2 Installation Manual download pdf (Page 16)

USA

7.1.2 WATER SUPPLY CONNECTION

Water supply may be connected to the dishwasher in one of

two ways:

• With metal braided hose.

• With copper tubing.

7.1.3 BRAIDED HOSE/COPPER TUBING

After connections are made turn on the water supply to check

for leaks.

CAUTION

• Hot water supply line: Use minimum 3/8” O.D. copper tubing or metal braided dishwasher

supply line.

• Temperatures required for soldering and sweating will damage the dishwasher’s water inlet

valve so if any such operation is needed, keep the heat source min. 7

” (200mm) away

from the dishwasher’s water inlet valve.

• Thereshouldnotbeanysharpbendsinthewaterlinethatmayrestrictthewaterow.

• Teontapeorpipetreadcompoundmustbeusedforsealingtheconnection.Before

connectingthecopperwatersupplylinetothedishwasher,ushitwithhotwatertoclearany

foreign material.

Notice :

After connections are made turn on the water supply to check for leaks.

7.2 ELECTRICAL CONNECTION

WARNING

• Make sure the voltage and frequency listed on the data plate correspond with the

household electrical supply. This data must correspond to prevent injury and machine

damage. Consult a qualified electrician if in doubt.

• Only connect the dishwasher to the mains when all installation and plumbing work is

complete.

• Do not use any extension cord or portable outlet device to connect the dishwasher to

a power supply.

• The power-supply receptacle for the appliance shall be installed in a cabinet or on a

wall adjacent to the undercounter space in which the appliance is to be installed.

• The access hole of the supply cord to the installation compartment must be smooth

and rounded and it must be large enough for the attachment plug to pass through.

The longest dimension of the opening shall not be more than 1,5” (38 mm).If the

partition is metal, it needs to be covered with the edge protector (m).

• Care must be taken when the appliance is installed or removed, to reduce the

likelihood of damage to the power-supply cord.

7.2.1 GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of least resistance for electric current. This appliance is

equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must

be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes

and ordinances. This appliance must be connected to a grounded metal, permanent wiring system,

or an equipment-grounding conductor must be run with the circuit conductors and connected to the

equipment-grounding terminal or lead on the appliance.

WARNING

• Improper connection of the equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or service representative if you are

in doubt whether the appliance is properly grounded. Do not modify the plug provided

with the appliance, if it will not fit the outlet, have a proper outlet installed by a

qualified electrician.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Comments to this Manuals

No comments

Summit DW18SS2 Installation Manual Page 16

Comments to this Manuals

Related products and manuals for Dishwashers Summit DW18SS2