Summit 21287 User Manual

SUMMIT® BUILT-IN LP TANK ENCLOSURE KIT42390 US 03/22/04LP US English# 42390THIS GAS APPLIANCE IS DESIGNED FOR OUTDOOR USE ONLY.WARNING: D

10Note - Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checki

11REFILLING THE LIQUID PROPANE CYLINDERWe recommend that you refi ll the LP cylinder before it is completely empty.Removal of the LP cylinder1) Close

12Liquid Propane (LP) Cylinder(s)• The joint where the hose connects to the LP cylinder must be leak tested each time the LP cylinder is reconnected.

2DANGERS & WARNINGS DANGERFailure to follow the Dangers, Warnings and Cautions contained in this Owner's Manual may result in serious bodi

3OPERATING WARNING: Only use the Weber® Tank Enclosure Kit outdoors in a well-ventilated area. Do not use in a ga-rage, building, breezeway or any ot

4Typical 20 LP propane gas supply Instal-lationWe strongly recommend that you use the Summit® Built-In Tank Cabinet (#21280) for installations using a

5LOCATING YOUR LP TANK ENCLOSURE KITWhen determining a suitable location for your LP Tank Enclosure Kit installation, give attention to concerns such

648412422PARTS LIST Hose and regulator - 1Tank stand - 1Tank stand base - 1Tank Scale - 11/4-20 nut - 6Nylon washer - 121/4-20 x 1/2" bolt - 6Cy

7MOUNTING THE LP TANK BRACKETMount the LP tank bracket to the right hand side of the enclosure opening using non corrosive hardware.. Mounting holes a

8GAS INSTRUCTIONS90ºfittingConnection toLP TankCorrugated Gas Lineto ManifoldCap(Optional Side Burner)Side Viewback of boxtop of boxCONNECT GAS SUPPLY

94) Screw the regulator coupling onto the tank valve, clock-wise, or to the right. Hand-tighten only. Note: This connection tightens clockwise and wi