Summit FFBF101SSIM Manual download pdf (Page 9)

3.3 Display

◆ Once initially powered on，the display screen (including the key light) is on full display for

3 seconds，and then displays the actual operation position.

◆ Normal operation display

In case of a failure, the appropriate LED lights in combination show the failure code (in recycling

display); see “3.5 Fault indication” below.

If there is no failure, the actual operation position of the refrigerator will be on display.

3.4 Shift setting

Each time the shift setting key A is pressed，the shift setting changes by one position. After the shift

setting has been completed, the refrigerator will operate according to the set value after 5 seconds.

From left to right, the set temperature becomes lower.

The shift regulation is：

3.5 Fault indication

Display Malfunction

LED1 and LED2 are lit Refrigerator temperature sensor circuit

LED1 and LED3 are lit Freezer defrost sensor

LED1 and LED4 are lit Ambient temperature sensor

3.6 Temperature Control

On the refrigerator compartment control panel (above), Shift 1 is the warmest setting while Shift 5 is the coldest.

For normal ambient temperatures, Shift 3 should be selected.

On the freezer compartment control knob (at right), select the Mid position

when the ambient temperature is normal.

If the ambient temperature will be lower than 55°F for an extended period of

time, the control knob should be placed at the COLDER position.

If the ambient temperature is higher than 90°F for a long time or a fast freeze

is needed, place the control knob in the COLD position.

3.7 Fruit and Vegetable Box Humidity Control

By toggling the humidity-adjusting control (at right), you can adjust

the humidity in the fruit and vegetable drawer.

4. CLEANING

4.1 Defrosting

Auto-defrost for Frost-free Refrigerator

4.2 Cleaning the Interior and the Exterior of the Unit

◆ Remove all the shelves and the salad bin. To remove the salad bin, first remove the lower door

shelf.

Shift 1 Shift 2 Shift 3 Shift 4

Shift 5

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Summit FFBF101SSIM Manual Page 9