Summit ARWL129NA User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
NA
! This instruction manual should be kept in a safe place
forfuturereference.Ifthewasherissold,transferredor
moved, make sure that the instruction manual remains with
the machine so that the new owner is able to familiarise
himself/herselfwithitsoperationandfeatures.
!Readtheseinstructionscarefully:theycontainvitalinfor-
mation relating to the safe installation and operation of the
appliance.
Unpacking and levelling
Unpacking
1.Removethewasherfromitspackaging.
2.Makesurethatthewasherhasnotbeendamaged
duringthetransportationprocess.Ifithasbeendamaged,
contact the retailer and do not proceed any further with the
installationprocess.
3.Removethe4 protective
screws (used during tran-
sportation) and the rubber
washer with the correspon-
ding spacer, located on the
rear part of the appliance
(see figure).
4.Closeofftheholesusingtheplasticplugsprovided.
5.Keepallthepartsinasafeplace:youwillneedthem
againifthewasherneedstobemovedtoanotherlocation.
! Packaging materials should not be used as toys for
children.
Levelling
1.Installthewasheronaflatsturdyfloor,withoutrestingit
upagainstwalls,furniturecabinetsoranythingelse.
2.Ifthefloorisnotperfectly
level, compensate for any
unevenness by tightening
or loosening the adjusta-
ble front feet (see figure);
the angle of inclination,
measured in relation to the
worktop, must not exceed
2°.
Levelling the machine correctly will provide it with stability,
help to avoid vibrations and excessive noise and prevent it
fromshiftingwhileitisoperating.
Minimum Installation Spacing
This appliance may be installed in a recessed area, closet
oralcove.Theinstallationspacingisininchesandisthe
minimumacceptable.
*Additionalspacingshouldbeconsideredforeasyinstal-
lation, servicing and compliance with local codes and
ordinances.Installationsmustconformwiththeminimum
dimensionsindicated.
0" *
0" *
Recessed Front View
1" *
1"
Side View
Installation instructions
Page view 3
1 2 3 4 5 6 7 8 9 ... 55 56

Comments to this Manuals

No comments