Summit FF1112BL User Manual download pdf (Page 5)

Technical Information

Models: FF1112W (white)

FF1112BL (black)

FF1152SS (black cabinet

with stainless steel door)

Capacity: 10.3 cubic feet

Electrical Input: 115V AC / 60Hz

Rated Current: 1.6A

Energy Consumption: 309 kWh/yr

Energy Star approved: Yes

Refrigerant: R134a, 5.3 oz

Installation: Free-standing

Shipping Weight: 166 lbs

Unit Dimensions: 23.63"W x 26.0"D x 58.88"H

Installation Instructions

Before Using Your Appliance:

 Remove the exterior and interior packing.

 Check to be sure you have all of the following parts:

 2 wire shelves

 1 crisper drawer with clear cover

 1 ice cube tray

 Before connecting the unit to the power source, let it stand for approximately 2

hours. This will reduce the possibility of a malfunction in the cooling system

from handling during transportation.

 Clean the interior surface with lukewarm water using a soft cloth.

Installing the Appliance

 This appliance is designed to be free-standing only, and should not be

recessed or built in.

 Place your unit on a floor that is strong enough to support it when it is fully

loaded. To level your unit, adjust the leveling legs at the bottom.

 Allow 5 inches of space between the back and sides of the unit, which will

allow the proper air circulation to cool the compressor and condenser.

 Locate the unit away from direct sunlight and sources of heat (stove, heater,

radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

Summit FF1112BL User Manual Page 5