Summit FF-7 User Manual

FELIX STORCH, INC. SUMMIT APPLIANCE DIVISION® INSTRUCTION MANUAL FOR MODEL(S): All Variations of the FF-6 All Variations of the FF-7 & All Va

Adjusting the Level legs The Professional units (those with a BI suffix in model number) have 4 adjustable level legs. By turning the legs counter-

Ice Formation on the Inner Rear Wall Possible Causes *The door does not seal well (clean the gasket if it is contaminated, or replace i

. After starting the appliance, the operation of the compressor and the refrigerant flow may be louder and this does not mean something is

Write the model and serial numbers here: Model#_____________________ Serial #___________________ Find these numbers on the back of the unit Tab

*Before Putting Into UsE* Before connecting the appliance to the power supply, leave it standing for about 2 hours, this will reduce the possibili

IMPORTANT If you bought this appliance to replace an old one equipped with a lock that cannot be opened from inside (lock, bolt), make sure that t

PLACING AND INSTALLATION It is important to make sure the appliance is leveled evenly to prevent falling. Two spacers attached to the appliance m

Operation control How To Adjust The Thermostat The refrigerator is controlled with a thermostat knob located inside unit, towards the right-hand co

Storing Fresh Foods Foods to be stored in the refrigerator should be properly packed as to prevent mixing various moisture degrees and odors (in p

There is no need to defrost the refrigerator, because the ice depositing on the inner back wall is defrosted automatically. Ice

Door swing reversal (Stainless steel models with towel bar handles do not have reversible doors.)If you find the direction of opening the door on your