Summit SWC1875 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
It is recommended to set the LOWER ZONE to 55º - 65ºF (13º - 18ºC) which is ideal for storing
white and red wines and the UPPER ZONE to 4- 55ºF (- 13ºC) which is ideal for storing
sparkling and white wines.
The temperature you are setting will increase by one degree each time you touch the UP
symbol, and will decrease by one degree each time you touch the DOWN symbol.
When you store mostly red wines, the temperature should be set at 5- 72ºF (15º - 22ºC) and
the LED lamp for RED will be lit red.
When you store mostly white wines, the temperature should be set at 4- 57ºF (- 14ºC) and
the LED lamp for WHITE will be lit green.
When you store mostly sparkling wines, the temperature should be set at 40º - 47ºF (- 8ºC)
and the LED lamp for SPARKLING will be lit amber.
The temperature inside the unit will appear in blue in the display window.
Interior Lights
The unit is equipped with an interior LED light for each compartment which can be turned ON or
OFF by touching the corresponding
symbol.
STORAGE
Bottles can differ in size and dimensions. As such the actual number
of bottles you may be able to store can vary.
You can place 108 standard bottles in this model with 8 bottles on
each full-size shelf and 6 bottles on the bottom half-size shelf. Bottle
capacity is at its optimum when storing traditional 750-ml Bordeaux
bottles.
DOOR LOCK
Your unit is provided with a lock and key combination for each door.
The keys are located inside the plastic bag that contains the Instruction Manual. Insert the key into the
lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation, making
sure the metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
NOTE:
If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variation between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.
8-Bottle Arrangement
6-Bottle Arrangement
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments