Summit FF1119B Owner's Manual download pdf (Page 5)

Technical Information

Models: FF1118W (white)

FF1119B (black)

FF1159SS (black cabinet

with stainless steel doors)

Capacity: 10.3 cubic feet

Electrical Input: 115V AC / 60Hz

Rated Current: 1.6A

Energy Consumption: 297 kWh/yr

Energy Star approved: Yes

Refrigerant: R134a, 5.3 oz

Installation: Free-standing

Shipping Weight: 166 lbs

Unit Dimensions: 23.63"W x 26.0"D x 58.88"H

Installation Instructions

Before Using Your Appliance

• Remove the exterior and interior packing.

• Check to be sure you have all of the following parts:

 2 wire shelves

 1 crisper drawer with clear cover

 1 ice cube tray

• Before connecting the unit to the power source, let it stand for approximately 2

hours. This will reduce the possibility of a malfunction in the cooling system

from handling during transportation.

• Clean the interior surface with lukewarm water using a soft cloth.

Installing the Appliance

• This appliance is designed to be free-standing only, and should not be

recessed or built in.

• Place your unit on a floor that is strong enough to support it when it is fully

loaded. To level your unit, adjust the leveling legs at the bottom.

• Allow 5 inches of space between the back and sides of the unit, which will

allow the proper air circulation to cool the compressor and condenser.

• Locate the unit away from direct sunlight and sources of heat (stove, heater,

radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

Summit FF1119B Owner's Manual Page 5